This time period refers back to the unpainted or painted shell utilized in radio-controlled (RC) automobiles scaled to roughly 1/tenth the scale of a full-scale car, and particularly designed for brief course racing. The shell replicates the looks of the full-size vehicles utilized in brief course off-road racing, sometimes that includes outstanding fenders, practical detailing, and a protecting roll cage design. These parts are usually made from sturdy supplies like polycarbonate to resist impacts and abrasions throughout operation.
The importance of those shells lies of their contribution to each the efficiency and aesthetic attraction of the RC car. Aerodynamic issues affect the design to optimize dealing with and stability at pace. The practical scale look enhances the general expertise, emulating the joys of full-size brief course racing. Traditionally, these our bodies have advanced alongside developments in supplies know-how and modifications within the design of their full-scale counterparts, mirroring real-world developments in off-road motorsport.
Understanding this physique kind is key for choosing acceptable parts, optimizing efficiency, and appreciating the size realism that defines brief course RC racing. The next sections will discover particular elements associated to materials choice, design issues, and efficiency traits.
1. Polycarbonate Shell
The connection between the polycarbonate shell and the 1/10 brief course physique is key. It’s not merely an outer masking, however somewhat the defining materials and structural factor that enables the car to resist the trials of off-road racing, keep a practical look, and carry out at optimum ranges. The choice of polycarbonate is deliberate, pushed by its particular properties which align with the calls for of the appliance.
-
Impression Resistance
Polycarbonate’s excessive affect resistance is paramount. Throughout a race, these RC automobiles are subjected to collisions, rollovers, and impacts with monitor obstacles. With out polycarbonate, the shells would shatter simply, rendering the car unusable. The fabric’s capacity to soak up and dissipate vitality prevents catastrophic failure, permitting drivers to proceed competing even after important impacts. Take into account the repeated impacts throughout a typical race; lesser supplies wouldn’t survive.
-
Weight-to-Power Ratio
The fabric boasts a positive weight-to-strength ratio. A lighter physique contributes to improved acceleration, dealing with, and leaping capacity. Nevertheless, this weight discount should not compromise structural integrity. Polycarbonate gives a steadiness, delivering enough power to resist impacts whereas minimizing pointless weight. Different supplies may supply related power, however at a better weight penalty, negatively affecting efficiency.
-
Formability and Element
Polycarbonate is definitely molded and shaped, enabling the creation of intricate designs and practical scale particulars. Producers can precisely replicate the looks of full-size brief course vehicles, capturing the visible essence of the game. This formability additionally permits for aerodynamic shaping, additional enhancing efficiency. Supplies which are tough to mould would prohibit design prospects and compromise the practical look of the physique.
-
Sturdiness and Longevity
Past affect resistance, polycarbonate can be immune to cracking, scratching, and UV degradation. This ensures that the physique maintains its look and structural integrity over time, even with repeated use in harsh out of doors circumstances. Lesser supplies can develop into brittle and discolored after publicity to daylight and the weather, lowering their lifespan and affecting the general worth of the car.
Using polycarbonate is due to this fact not a superficial selection, however a rigorously thought-about engineering resolution. It straight impacts the sturdiness, efficiency, and visible attraction of the 1/10 brief course physique, enabling it to satisfy the demanding necessities of this aggressive type of RC racing. The traits of this materials, from affect resistance to formability, are important to the performance and delight derived from these automobiles.
2. Scale Realism
The pursuit of authenticity drives the design of a 1/10 brief course physique. It’s not merely about shrinking a full-size truck design; it is a concentrated effort to duplicate the visible cues that outline the precise automobiles raced on brief course tracks. The impact is a creation that sparks an immersive expertise, blurring the road between a mannequin and its full-scale inspiration. This pursuit has actual penalties for the fanatic; it impacts not simply aesthetics, however the connection they really feel with the passion.
Take into account the main points the meticulously recreated roll cages, the aggressively flared fenders, the precisely depicted sponsor decals. These parts mix to create a miniature reproduction that captures the essence of the true automobiles. The deeper significance lies within the hyperlink between look and the expertise it gives. A well-executed physique enhances the sense of realism, making a visceral connection to the game and its tradition. This connection can gas ardour, driving fans to speculate extra time and vitality into the passion. In flip, this demand pushes producers to try for even higher ranges of accuracy, perpetuating a cycle of enchancment. One might analyze this by observing the transition of rc automotive physique design and options, to precisely resemble full-scale car throughout the previous few years.
In the end, scale realism is not only a beauty consideration; it is an integral a part of the 1/10 brief course expertise. It shapes the connection between the fanatic and the passion, influencing the perceived worth and delight. The continued give attention to correct element displays a dedication to authenticity, solidifying the enduring attraction of those meticulously crafted miniature race automobiles. The continued problem lies in balancing realism with practicality, creating our bodies that aren’t solely visually spectacular but additionally sturdy and purposeful on the monitor.
3. Aerodynamic Profile
The form molded into the polycarbonate, the curve of a fender, the angle of the windshield these should not arbitrary design selections. They signify a calculated manipulation of airflow, a quest to harness the invisible forces that buffet the 1/10 brief course physique because it hurtles throughout the monitor. The aerodynamic profile will not be an aesthetic afterthought; it’s an engineering crucial that dictates stability, pace, and in the end, victory. A poorly conceived profile creates turbulence, growing drag and lifting the entrance finish, resulting in unpredictable dealing with and misplaced time. Conversely, a well-optimized design channels air effectively, lowering resistance and producing downforce, planting the tires firmly on the bottom for elevated grip and management. The distinction is commonly measured in fractions of a second, however these fractions can separate triumph from defeat.
Take into account the evolution of those our bodies over time. Early designs typically prioritized scale realism over aerodynamic effectivity, leading to visually interesting however aerodynamically compromised automobiles. As the game matured, and competitors intensified, designers started to include wind tunnel testing and computational fluid dynamics to refine their creations. The result’s a delicate however important shift within the look of the our bodies, with smoother strains, built-in spoilers, and strategically positioned vents designed to handle airflow and decrease drag. The relentless pursuit of aerodynamic benefit is a tangible illustration of how engineering ideas are utilized to enhance efficiency in even seemingly easy fashions.
The understanding of this profile extends past the design studio and onto the monitor. Skilled racers be taught to fine-tune their car’s dealing with traits by adjusting the physique’s top, angle, and even including small aerodynamic aids like wings or deflectors. These changes, knowledgeable by remark and expertise, can have a noticeable impact on the car’s efficiency, permitting racers to adapt to totally different monitor circumstances and driving kinds. In the long run, the aerodynamic profile of the 1/10 brief course physique is a testomony to the facility of cautious design and engineering, a silent power that shapes the result of each race.
4. Impression Resistance
The sector is a maelstrom of mud and roaring motors. The 1/10 brief course physique, a vibrant shell of polycarbonate, is about to satisfy the unforgiving actuality of high-speed competitors. On this world, affect resistance will not be a fascinating trait; it’s a basic requirement for survival. The narrative of every race is etched onto these our bodies, a testomony to collisions endured and victories hard-won. With out it, the pursuit of pace and precision could be a fleeting, unsustainable endeavor.
-
The Anatomy of a Crash
Think about the second: a sudden lack of management, a determined try and appropriate, after which, affect. The physique slams in opposition to a monitor barrier, a competitor’s wheel, or the unforgiving earth. The vitality of that collision, if not correctly absorbed, would tear the shell aside. Impression resistance, on this context, is the flexibility of the polycarbonate to deform, flex, and distribute that vitality, stopping catastrophic failure. It is the distinction between a minor scratch and a ruined race. Take into account the strategic placement of ribs and reinforcements, every designed to channel forces away from weak areas, a silent protection in opposition to the inevitable chaos.
-
Materials Science and the Polycarbonate Protect
The selection of polycarbonate is deliberate. It’s a polymer engineered to resist immense stress. Its molecular construction permits it to soak up important affect vitality with out shattering. This isn’t a passive protection; it’s an lively engagement with the forces at play. The fabric yields barely, bending as an alternative of breaking, permitting the vitality to dissipate throughout its floor. This flexibility, this inherent resilience, is what permits these our bodies to outlive race after race, a testomony to the ingenuity of supplies science.
-
The Value of Compromise
Think about a situation the place producers go for cheaper, much less resilient supplies. The implications could be instant and extreme. Our bodies would shatter on affect, requiring frequent replacements and incurring important prices for racers. The very nature of brief course racing, with its aggressive maneuvers and close-quarters competitors, could be essentially altered. The willingness to threat harm, to push the boundaries, could be tempered by the concern of catastrophic failure. Impression resistance, due to this fact, is not only about sturdiness; it is about enabling the spirit of competitors.
-
Past the Observe: Longevity and Worth
The advantages of affect resistance prolong past the instant confines of the race monitor. A sturdy physique, one that may stand up to repeated impacts with out succumbing to break, represents a long-term funding for the racer. It retains its look, its structural integrity, and its worth over time. This longevity is a crucial issue for fans who demand efficiency and sturdiness. The flexibility to reuse a physique, to see it bear the marks of many races with out falling aside, provides to the sense of accomplishment and connection to the passion.
The story of affect resistance and the 1/10 brief course physique is a narrative of survival, innovation, and enduring worth. It’s a narrative woven into each crash, each shut name, and each hard-fought victory. The physique, scarred and weathered, stands as a testomony to the forces it has endured, a tangible illustration of the resilience that defines this exhilarating type of RC racing. The continued pursuit of even higher affect resistance stays a driving power within the evolution of those automobiles, making certain that they will proceed to resist the trials of competitors for years to return.
5. Mounting System
The connection between the mounting system and the 1/10 brief course physique is a vital however typically ignored side of RC car efficiency. It’s the interface that dictates how securely the physique attaches to the chassis, influencing not solely the car’s look but additionally its dealing with and general sturdiness. The story of a well-designed mounting system is one in all precision, resilience, and a deep understanding of the forces at play throughout high-speed operation. It’s a story of how seemingly minor particulars can have a major affect on the general efficiency and delight of the passion.
-
Safe Attachment and Stability
The first position of the mounting system is to make sure that the physique stays firmly hooked up to the chassis, even below the stresses of racing. A free or poorly designed system can result in physique wobble, which impacts the car’s aerodynamics and dealing with. Furthermore, within the occasion of a crash, a safe mounting system can stop the physique from detaching utterly, minimizing harm and permitting the racer to proceed competing. A standard instance is the usage of physique clips, small metallic fasteners which are inserted via holes within the physique and chassis. Their placement and design are crucial for reaching a steadiness between safe attachment and ease of elimination for upkeep.
-
Vibration Dampening and Noise Discount
Past easy attachment, a complicated mounting system can even incorporate options that dampen vibrations and cut back noise. That is notably vital in electrical RC automobiles, the place extreme vibration can harm delicate digital parts. Rubber grommets or related cushioning supplies can be utilized to isolate the physique from the chassis, absorbing vibrations and lowering the transmission of noise. This leads to a smoother, quieter, and extra dependable driving expertise. The absence of such options can result in untimely put on and tear on each the physique and the chassis.
-
Ease of Entry and Upkeep
The design of the mounting system should additionally think about the necessity for simple entry to the car’s inner parts for upkeep and repairs. A system that’s overly complicated or tough to function could make even routine duties a irritating expertise. Many trendy mounting programs make the most of quick-release mechanisms or tool-free designs that enable the physique to be eliminated and reattached in a matter of seconds. That is notably useful for racers who have to make frequent changes or repairs throughout a race occasion. Simplicity and accessibility are key issues within the design of a user-friendly mounting system.
-
Customization and Compatibility
The mounting system is commonly one of many first issues that racers customise on their RC automobiles. There are all kinds of aftermarket mounting programs accessible, providing totally different options and ranges of adjustability. Some programs enable the physique to be raised or lowered to regulate the car’s middle of gravity, whereas others present enhanced safety in opposition to impacts. Compatibility with totally different physique kinds and chassis configurations can be an vital consideration. The flexibility to simply adapt the mounting system to go well with particular person preferences and driving kinds is a trademark of a well-designed and versatile system.
In conclusion, the mounting system is excess of only a technique of attaching the 1/10 brief course physique to the chassis. It’s an integral a part of the car’s general efficiency and sturdiness. A well-designed system can improve stability, cut back vibration, enhance ease of upkeep, and supply alternatives for personalization. The cautious choice and correct set up of the mounting system are due to this fact important for reaching the very best driving expertise and maximizing the longevity of the car.
6. Wheel Effectively Clearance
The 1/10 brief course physique, a miniaturized echo of its full-scale racing counterpart, encounters an important intersection of type and performance on the wheel wells. These seemingly easy openings should not mere aesthetic cutouts; they’re rigorously engineered clearances that dictate the car’s operational capability, notably within the dynamic setting of off-road racing. Inadequate house invitations catastrophe, whereas extreme allowance compromises efficiency. Thus, wheel properly clearance turns into a silent arbiter of success, dictating the boundaries inside which the car should function.
-
Lodging of Suspension Journey
The center of any brief course car lies in its suspension system, engineered to soak up the brutal impacts of uneven terrain. Because the wheels encounter bumps and jumps, the suspension compresses and extends, inflicting the tires to maneuver vertically relative to the chassis. Wheel properly clearance have to be enough to accommodate this full vary of movement, stopping the tires from rubbing in opposition to the physique. Such contact not solely damages the physique but additionally impedes suspension journey, compromising dealing with and stability. One observes, the wheel touching throughout jumps can throw the entire car off and lose management.
-
Allowance for Tire Dimension and Choice
The selection of tires is a crucial consider optimizing efficiency on totally different monitor surfaces. Bigger diameter tires present elevated floor clearance and improved traction in free circumstances, whereas smaller diameter tires supply higher agility and responsiveness on hard-packed surfaces. Wheel properly clearance have to be enough to accommodate the specified vary of tire sizes. A physique with insufficient clearance will restrict tire choice, forcing racers to compromise on efficiency. Actual-world racers typically have a number of units of our bodies with assorted clearances to match the circumstances.
-
Mitigation of Mud and Particles Accumulation
Quick course racing typically takes place in environments the place mud, grime, and different particles are prevalent. Because the wheels rotate, they fling this materials upwards, probably accumulating inside the wheel wells. Inadequate clearance can result in a buildup of particles, which may rub in opposition to the tires, impede suspension journey, and even harm the physique. The implications result in poor acceleration, steadiness, and dealing with throughout races.
-
Affect on Aerodynamic Traits
Whereas primarily purposeful, wheel properly clearance additionally subtly influences the aerodynamic traits of the 1/10 brief course physique. The dimensions and form of the wheel properly openings can have an effect on airflow across the tires, contributing to general drag and raise. A well-designed wheel properly can decrease turbulence and enhance aerodynamic effectivity, enhancing stability and pace. The consequences are very delicate, however make a distinction to aggressive racers.
The cautious consideration of wheel properly clearance is due to this fact paramount within the design and choice of a 1/10 brief course physique. It’s a crucial issue that dictates the car’s operational capability, influencing suspension efficiency, tire choice, particles administration, and aerodynamic traits. In the end, the wheel properly clearance shapes the car’s efficiency and capabilities on the monitor, highlighting the profound interaction between type and performance on the earth of RC racing.
7. Roll Cage Design
The roll cage, although scaled down within the realm of the 1/10 brief course physique, carries a weight of duty far exceeding its diminutive dimension. It stands as a skeletal guardian, an intricate framework of plastic or metallic that braces the car’s weak shell in opposition to the brutal forces of off-road competitors. The presence of a well-designed cage will not be merely beauty; it speaks to a basic understanding of physics, of vitality absorption, and of the fragile steadiness between safety and efficiency. Its type follows operate, mirroring the full-scale roll cages that safeguard drivers of their high-powered counterparts. The absence of such a construction, or its inadequacy, can result in catastrophic outcomes, the place the physique, disadvantaged of assist, succumbs to the relentless punishment of impacts and rollovers.
Take into account a situation: A 1/10 brief course truck, careening round a good nook, clips a monitor barrier. With no strong roll cage, the affect might crush the physique, damaging the chassis beneath and rendering the car inoperable. However with a correctly engineered cage, the power is distributed, the vitality dissipated throughout the community of bars and helps. The physique may maintain scratches, maybe a crack, however its structural integrity stays largely intact, permitting the race to proceed. One could observe, these rc truck with out roll cage, typically endure harm when colliding. The design of the cage itself is an train in compromise. It have to be robust sufficient to resist important impacts, but gentle sufficient to keep away from including pointless weight. It have to be built-in seamlessly into the physique, not just for aesthetic attraction but additionally to make sure that the forces are transmitted successfully all through the construction.
The roll cage of the 1/10 brief course physique serves as an indicator of high quality and design philosophy. It displays a dedication to sturdiness, to realism, and to the preservation of the car’s efficiency below duress. It stands as a silent testomony to the forces it has withstood, a community of scars and battle wounds that inform the story of numerous races and hard-fought victories. Because the know-how evolves, so too will the roll cage, persevering with to function a crucial element in safeguarding the integrity and efficiency of those miniature racing machines.
8. Weight Distribution
The story of the 1/10 brief course physique is, partly, a examine of equilibrium. Whereas the outside shell captures the attention with its scale realism and aggressive styling, beneath the floor lies a crucial consideration: weight distribution. This invisible hand shapes the car’s dealing with, influencing its capacity to navigate treacherous turns, soar over jumps, and keep composure on uneven terrain. The location of mass, due to this fact, turns into a silent language spoken between designer and driver, a dialog carried out via the car’s response to each enter.
An instance lies within the positioning of the battery pack. Shifting its location ahead enhances steering response, enabling tighter cornering. Nevertheless, this profit comes at the price of decreased stability at excessive speeds, making a pendulum impact that may unsettle the car throughout jumps. Conversely, positioning the battery pack rearward promotes stability and traction, notably on free surfaces. Nevertheless, this configuration diminishes steering agility, making it difficult to navigate tight, technical sections. The expert racer understands these nuances, rigorously adjusting the burden distribution to match the particular calls for of the monitor, in search of that elusive equilibrium that unlocks optimum efficiency.
The challenges in reaching ideally suited weight distribution are manifold. The design of the 1/10 brief course physique itself presents constraints, limiting the position of parts. The will for scale realism can battle with the pursuit of optimum steadiness, forcing compromises within the chassis format. Moreover, the burden of particular person parts, from the motor to the digital pace controller, performs a major position, including layers of complexity to the equation. Regardless of these challenges, the mastery of weight distribution stays an important ability, one which separates the informal fanatic from the seasoned competitor. It’s a fixed means of refinement, a quest to know the delicate interaction of forces that govern the conduct of those miniature racing machines.
Incessantly Requested Questions
The world of 1/10 scale brief course racing presents fans with a continuing stream of questions. From the delicate nuances of fabric choice to the complicated dynamics of on-track efficiency, navigating this terrain requires a mix of data and expertise. This part addresses some continuously raised inquiries concerning the physique, providing concise and insightful solutions.
Query 1: What’s the typical lifespan of a 1/10 brief course physique earlier than it wants alternative?
The lifespan will not be measured in time, however in battles waged and impacts endured. A pristine physique may survive a single, aggressive race, whereas a well-maintained shell might endure a full season. Cracks, extreme put on round mounting factors, and important structural harm are the important thing indicators that alternative is imminent. Price range and efficiency targets normally dictate the alternative time.
Query 2: Can any 1/10 scale physique be used on a 1/10 brief course truck?
The easy reply isn’t any. The 1/10 brief course physique is particularly designed with options, that make it appropriate for high-speed racing. A touring automotive or buggy physique is not going to present enough tire clearance, affect safety, or aerodynamic efficiency for brief course racing. Correct fitment is also required for security.
Query 3: What are the advantages of portray a 1/10 brief course physique versus leaving it clear?
Past the plain aesthetic benefits, portray a 1/10 brief course physique affords sensible advantages. Paint protects the polycarbonate from UV degradation, stopping it from turning into brittle over time. Moreover, darkish colours may help to soak up warmth, stopping digital parts from overheating in excessive circumstances. The draw back is extra weight will have an effect on efficiency.
Query 4: What’s the easiest way to restore minor cracks or harm to a 1/10 brief course physique?
Small cracks can typically be repaired utilizing specialised polycarbonate glue or tape designed for RC functions. The hot button is to wash the broken space totally earlier than making use of the adhesive. For bigger cracks or holes, think about using a reinforcement patch made from fiberglass or carbon fiber, adhered to the within of the physique for added assist. Most fanatic typically apply Shoo Goo as the primary adhesive.
Query 5: Does the burden of the paint on a 1/10 brief course physique considerably have an effect on efficiency?
Whereas a skinny, even coat of paint can have a negligible affect, extreme layers of paint can add noticeable weight, notably on the high of the car. This elevated weight can increase the middle of gravity, negatively affecting dealing with and stability. Go for light-weight paints particularly designed for RC our bodies and apply them sparingly to attenuate this impact.
Query 6: How can the aerodynamic traits of a 1/10 brief course physique be adjusted for various monitor circumstances?
Delicate changes to the physique can affect its aerodynamic efficiency. Including a rear wing will increase downforce, bettering traction and stability on high-speed tracks. Trimming the wheel wells can cut back drag, growing high pace. Experimentation and cautious remark are key to discovering the optimum setup for a given monitor.
The 1/10 brief course physique is greater than only a beauty shell; it’s an integral a part of the car’s general efficiency and sturdiness. Understanding the nuances of its design, supplies, and upkeep is essential for maximizing enjoyment and reaching success on the monitor.
With a stable basis within the core ideas of the physique, the following sections will discover superior strategies for optimizing its efficiency.
Strategic Benefits
Within the relentless pursuit of aggressive benefit, mastery extends past uncooked pace. Take into account this: victory is commonly solid within the meticulous preparation, the cautious consideration given to each factor of the machine. The 1/10 brief course physique, that seemingly easy shell of polycarbonate, holds secrets and techniques to unlock superior efficiency.
Tip 1: Aerodynamic Nice-Tuning The angle of assault issues. Make use of strategically positioned shims below the physique mounts to change the physique’s rake. A steeper rake will increase downforce, enhancing grip on high-speed tracks, whereas a shallower angle reduces drag, maximizing high pace on open circuits.
Tip 2: Weight Discount Methods Each gram counts. Decrease paint software, choosing light-weight, single-layer schemes. Discover the usage of precision-cut vinyl decals as an alternative of heavier, full-body wraps. Drill small, strategically positioned holes in non-critical areas to additional cut back weight, with out compromising structural integrity.
Tip 3: Impression Reinforcement Protocols Anticipate the inevitable. Reinforce high-impact areas, such because the entrance bumper and rear fenders, with strategically positioned carbon fiber tape or fiberglass mesh. This proactive method mitigates harm from collisions, extending the physique’s lifespan and preserving its aerodynamic profile.
Tip 4: Mounting System Optimization Safety breeds confidence. Change the inventory physique clips with a extra strong retention system, reminiscent of screw-on mounts or magnetic fasteners. This prevents the physique from detaching throughout aggressive maneuvers or high-speed impacts, sustaining aerodynamic stability and stopping expensive DNFs.
Tip 5: Wheel Effectively Administration Friction is the enemy. Rigorously trim the wheel wells to offer ample clearance for suspension journey and tire growth. Use a rotary software with a sanding drum to attain a easy, constant edge, minimizing the danger of tire rub and sustaining optimum dealing with traits.
Tip 6: Physique Submit Safety Forestall catastrophic failure. Place small rubber O-rings between the physique and the physique posts. These act as shock absorbers, stopping the posts from cracking the physique throughout laborious landings or rollovers. This easy addition can considerably prolong the lifetime of the physique.
Tip 7: Observe Chassis Flex and Affect Some chassis flex greater than others, the physique can add rigidity, or impede the flex. Observe the chassis throughout laborious acceleration or cornering and notice if the physique is impeding flex. The objective is to not inhibit efficiency, but additionally maintain the physique protected.
These methods, when applied with diligence and precision, transcend easy modifications. They signify a dedication to optimization, a dedication to extracting each final ounce of efficiency from the 1/10 brief course machine.
The next sections construct upon these ideas, delving deeper into the complicated interaction of forces that govern on-track success.
The Legacy of the Shell
The journey via the panorama of the “1/10 brief course physique” reveals greater than only a element; it uncovers an intersection of engineering, artistry, and aggressive spirit. From the choice of resilient polycarbonate to the cautious sculpting of aerodynamic profiles, every resolution contributes to the car’s efficiency and sturdiness. The pursuit of scale realism, the challenges of weight distribution, and the crucial position of affect resistance all coalesce right into a single, defining factor: the shell. It’s the car’s face, its armor, and infrequently, the canvas upon which victory is painted.
Because the checkered flag waves on this exploration, one displays on the enduring significance of this factor. Whereas know-how advances and racing methods evolve, the basic ideas of design and efficiency stay timeless. It beckons fans to delve deeper, to experiment, and to innovate, making certain that the legacy of the shell continues to encourage and drive the pursuit of excellence on the earth of 1/10 brief course racing. The way forward for the game hinges, in no small half, on the continual refinement and evolution of this deceptively easy, but profoundly influential element.
